1
|
# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
|
2
|
|
3
|
driftfile /var/lib/ntp/ntp.drift
|
4
|
|
5
|
# Leap seconds definition provided by tzdata
|
6
|
leapfile /usr/share/zoneinfo/leap-seconds.list
|
7
|
|
8
|
# Enable this if you want statistics to be logged.
|
9
|
#statsdir /var/log/ntpstats/
|
10
|
|
11
|
statistics loopstats peerstats clockstats
|
12
|
filegen loopstats file loopstats type day enable
|
13
|
filegen peerstats file peerstats type day enable
|
14
|
filegen clockstats file clockstats type day enable
|
15
|
|
16
|
# Specify one or more NTP servers.
|
17
|
|
18
|
# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
|
19
|
# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
|
20
|
# more information.
|
21
|
pool 0.ubuntu.pool.ntp.org iburst
|
22
|
pool 1.ubuntu.pool.ntp.org iburst
|
23
|
pool 2.ubuntu.pool.ntp.org iburst
|
24
|
pool 3.ubuntu.pool.ntp.org iburst
|
25
|
|
26
|
# Use Ubuntu's ntp server as a fallback.
|
27
|
pool ntp.ubuntu.com
|
28
|
|
29
|
# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
|
30
|
# details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
|
31
|
# might also be helpful.
|
32
|
#
|
33
|
# Note that "restrict" applies to both servers and clients, so a configuration
|
34
|
# that might be intended to block requests from certain clients could also end
|
35
|
# up blocking replies from your own upstream servers.
|
36
|
|
37
|
# By default, exchange time with everybody, but don't allow configuration.
|
38
|
restrict -4 default kod notrap nomodify nopeer noquery limited
|
39
|
restrict -6 default kod notrap nomodify nopeer noquery limited
|
40
|
|
41
|
# Local users may interrogate the ntp server more closely.
|
42
|
restrict 127.0.0.1
|
43
|
restrict 10.0.0.1
|
44
|
restrict ::1
|
45
|
|
46
|
# Needed for adding pool entries
|
47
|
restrict source notrap nomodify noquery
|
48
|
|
49
|
# Clients from this (example!) subnet have unlimited access, but only if
|
50
|
# cryptographically authenticated.
|
51
|
#restrict 192.168.123.0 mask 255.255.255.0 notrust
|
52
|
|
53
|
|
54
|
# If you want to provide time to your local subnet, change the next line.
|
55
|
# (Again, the address is an example only.)
|
56
|
broadcast 10.0.0.255
|
57
|
|
58
|
# If you want to listen to time broadcasts on your local subnet, de-comment the
|
59
|
# next lines. Please do this only if you trust everybody on the network!
|
60
|
#disable auth
|
61
|
#broadcastclient
|
62
|
|
63
|
#Changes recquired to use pps synchonisation as explained in documentation:
|
64
|
#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
|
65
|
|
66
|
#server 127.127.8.1 mode 135 prefer # Meinberg GPS167 with PPS
|
67
|
#fudge 127.127.8.1 time1 0.0042 # relative to PPS for my hardware
|
68
|
|
69
|
#server 127.127.22.1 # ATOM(PPS)
|
70
|
#fudge 127.127.22.1 flag3 1 # enable PPS API
|